OVERVIEW

IR Sample Download

The IR Sample is a sample selected from this Cabinet model, although the sound quality is lower than the Production version.(48khz / 500ms)
The production version has higher sound quality and contains many more microphone positions. You can create a wide range of sound variations with high quality.

Fend Delux Rev Sample

DYNAX IR Features

DYNAX IR is an IR, short for Impulse Response, that outputs the sound of a real guitar cabinet using DYNAX’s original method.
Our method provides the highest quality sound in all environments, including IR effectors and guitar processors that can load single or multiple IR data, as well as DAWs and plug-ins. DYNAX IR can also be combined to create many sound variations and output quality guitar sounds suitable for a wide range of genres.

As noted on the DYNAX website, another feature of the DYNAX IR is its low latency. The speed from picking to sound emission is considerably faster compared to other IRs.

Most generic IRs tend to sound distorted and artificial when the volume on the guitar is turned down, as the range and sustain are extremely reduced. However, DYNAX IR uses our original method to generate IRs and provide a realistic sound, which is excellent for picking, touch, and guitar volume control, as if an actual amp and cabinet are being used.

About IR Recording

DYNAX IR uses professional-grade microphones to record four positions per mic. Each position is converted to IR, so it can be used by itself or blended with other microphones and positions; the sound possibilities are endless.
Two types of IR are bundled, Standard IR and Advanced IR.

STANDARD IR DATA
STANDARD IR（Number of IRs: 44）
Microphone Position
Cap / CapEdge / Cone / Edge 4Total

Example of Standard IR data
DYNAX Fend Delux Rev SM57 Cap
DYNAX Fend Delux Rev SM57 CapEdge
DYNAX Fend Delux Rev SM57 Cone
DYNAX Fend Delux Rev SM57 Edge
DYNAX Fend Delux Rev MD421 Cap
DYNAX Fend Delux Rev MD421 CapEdge
(Total 44IR Bundle)

*Each microphone x 4 positions IR data is recorded.
*74IR for some cabinets
*The number of AIRs recorded varies depending on the cabinet and microphone characteristics, such as recording with different distances behind, above, and in front of the cabinet.

Cap : Contour and firmness with a strong Edge
CapEdge : Richer Mid and milder Edge than Cap
Cone: Sound with thickness in the Mid and low Mid
Edge: Sound with a focus on the Low to Mid

*Edge is useful when you want to reduce harshness. The mixing ratio should be around 8% to 15% when the main sound parameter is set to 100, but adjust according to the loader.

ADVANCED IR DATA
Advanced IR (Number of IRs: 24)
24 IR data bundled in total, combining microphones and positions suitable for Clean / Crunch / Drive.

Example of Advanced IR data
DYNAX AD Clean Fend Delux Rev R121+C414XLS
DYNAX AD Clean Fend Delux Rev SM57 + e906
DYNAX AD Crunch Fend Delux Rev MD421+U87
DYNAX AD Crunch Fend Delux Rev RE20+AG414
DYNAX AD Drive Fend Delux Rev MD421+M81
DYNAX AD Drive Fend Delux Rev VT2000+SM57
(Total 24IR Bundle)

Advanced can be used by itself, but the combination of Advanced + other microphones as shown above is also very effective. Please enjoy sound making by combining it with your preamplifier (simulator, amp head, etc.).

Microphone Position
Cap : Center of center cap
CapEdge : Edge of center cap
Cone : Center of cone
Edge : Edge of the cone
AIR : Off mic with room component

Recording Microphone Model

The following microphones are used in the production of DYNAX IR.
Each microphone is a registered trademark of its manufacturer or distributor.
List of microphones used for DYNAX IR:

List of microphones used for DYNAX IR

SM57：SHURE SM57
SM57mod：SHURE SM57 DYNAX mod
U87：NEUMANN U87Ai
KM184：NEUMANN KM184
MD421：Sennheiser MD421
e906：Sennheiser e906
AG314：AKG C314
AG414：AKG C414B-XLS
AG451：AKG 451EB
VT2000：SEIDE VT-2000
LW540s：LEWITT LCT540S
LW440：LEWITT 440DM
AT4050：Audio Technica AT4050
U195：SOUNDELUX U195
R121：ROYER R-121
RE20：Electro Voice RE20
M81：Telefunken M81
D4：AUDIX D4

Purchase Precautions
You can buy one DYNAX IR at a time. If you would like to purchase more than one IR, please place an order separately.
Payment for DYNAX IR products can only be made by PayPal check out.
Purchased IRs will be available for download in a zip format containing both Standard IRs and Advanced IRs.
After your purchase, You can receive Download Link by Email after payment.

Copyright Notice

All copyrights to DYNAX IR data are owned by Jidaisha Co., Ltd., which operates DYNAX. The purchased data shall be used only for the purchaser’s personal use, and the following acts are considered violations of the copyright law and license agreement. Please be careful and do not engage in any of the following acts:

・The reproduction and distribution of data for sale or promotion in stores, online stores, auctions, social networking services, etc., as well as the purchase of such products.

・Publishing data through file sharing software, etc, as well as downloading such data.

・Giving copies to friends or acquaintances.

・Due to the nature of the product, cannot return and refund the item you after purchase.